PIR Fireproof Insulated Cold Room Panel Machine PU Sandwich Panel Production Line
| Mataas na Liwanag: | Cold Room pu sandwich panel machine, PIR pu sandwich panel machine, Fireproof polyurethane sandwich panel machine | ||
|---|---|---|---|
PIR Fireproof At Insulated Cold Room Panel Machine na PU Sandwich Panel Production Line Panimula nglinya ng produksyon ng polyurethane sandwich panel:Ang polyurethane composite board continuous production line ay binubuo ng makina, kuryente, likido at polyurethane, ito ay awtomatikong tuluy-tuloy na linya ng produksyon na binubuo ng maraming unit.Ang linya ng produksyon ay gumagamit ng internasyonal na advanced na teknolohiya ng roll forming (kemikal) at polyurethane foaming technology, composite technology at hydraulic transmission technology, control technology numerical control, automatic stacking technology.Pangunahing Parameter ng Linya ng Produksyon:
| Pagtutukoy ng Plate ng Produksyon 1) Panel ng bubong at dingding: kinakailangan bilang diagram ng uri ng plato.Lapad: 1000mm Kapal: 40-200mm (hindi kasama ang corrugation) Haba : minimum na haba ng paggupit 3m (hindi kasama ang manu-manong pagputol) 2) Pagtutukoy ng Materyal: Kapal ng bakal : 0.4-0.8 mm (Ang bakal ay makinis na walang distortion) Ang maximum na lapad ng bakal : 1250mm ( Sukat Precision: ±2mm) Steel Strength : 235 MPa Coil maximum weight : 5 T Coin inner diameter : φ508,φ610mm 3) Production line specification : Bilis ng production line : 3-10 m/min (adjustable) Ang kabuuang haba ng production line : mga 160 metro Taas ng working table : 1200mm Working pressure ng foam pouring : 150-200 bar Ang haba ng double-belt conveyor : 24 m Control way: PLC controlling Total Power: mga 250kw (hindi kasama ang heating power) Power Supply : 380V /3 phase/50Hz Control Voltage: 24V/110V/220V ;Pneumatic:0.7Mpa (pabrika ay nagdadala kasama ng kanilang sariling) |
Teknikal mga parameter:
1) Bawat uncoiler ay may kasamang coiling block, machine base at drive system, ito ay gumagamit ng hydraulic cantilever expanding at may manual centering device:2) Uri ng coil:painted steel coil, aluminum coil:3) Thickness of steel sheet:0.4-0.8 mm: 4) Inner diameter ng steel coil:φ508mmsφ610mm:5) Outer diameter ng steel coil:φ1800mm:6) Weight capacity ng steel coil:5T:7) Lapad ng steel coil:Max 1250mm: Center adjustment: Max 150mm8) With material pressing device :ito ay naayos sa 30-40°sa itaas, na maaaring maiwasan ang pagkawala ng bakal na coil sa panahon ng uncoiling:Lifting table(1 pc):hydraulic motor drive lifting table na gumagalaw kasama ang gabay Bilis ng Paglalakbay : 6 m/min Ruta ng lifting: Max 350mm;Cross travel:Max 3000mm9) Pneumatic hydraulic system Max hydraulic pressure: 16 MPa;Hydraulic station Motor Power: 7.5kw Pneumatic:0.7Mpa (factory brings along with their own)
